-
About UsThe headquarters of Tianjin Lingjie Transmission Technology Co., Ltd. is located in Tianjin Binhai High-tech Zone. It is an electromagnetic clutch manufacturer and a high-tech enterprise integrating R & D and manufacturing. Products are widely used in missile silos, German Leica medical equipment, rail transit equipment, smart gates, robots, CCTV stage equipment, motor brakes, port equipment, CNC machine tools, motors, cement equipment, civil air defense equipment, packaging machinery, printing machinery, Paper machinery, textile machinery, office equipment, metallurgical machinery, tobacco machinery, automated production equipment and many other mechanical transmission systems as executive components, so as to complete the clutch, reversing, speed change, braking, positioning and other functions.
营销与服务业务咨询电话： -
Products
营销与服务业务咨询电话： -
BlogOur products are exported to Europe, America, Africa, Southeast Asia and other countries. Currently, the overseas offices are located in Ohio, Hamburg, Germany and Kuala Lumpur, Malaysia. The company's customers are all over the world, among which our company is the product supporting manufacturers of German Leica, IFE rail vehicle door system, Jie Shun Technology, Shenzhen Simorro and other companies. Creating value for the society with scientific and technological innovation is my eternal pursuit of agile transmission. "Integrity, responsibility and win-win" is our consistent goal.
营销与服务业务咨询电话： -
Industry Applications
营销与服务业务咨询电话：
Matters needing attention in the installation of jaw electromagnetic clutch
Release time:
2021-08-06
When installing the jaw-type electromagnetic clutch, ensure that there is a certain gap between the face teeth, so that there is no tooth grinding phenomenon when idling, but it should not be greater than the value of δ. 1. The electromagnetic clutch and brake are Class B insulation with normal temperature rise of 40 ℃. The working temperature of the limit thermal equilibrium is not allowed to exceed 100 ℃, otherwise it is easy to damage the coil and friction parts. 2, power supply and control circuit, clutch power supply is generally DC 24V (except for special orders). It is obtained by step-down and full-wave rectification of a three-phase or single-phase AC voltage. No need for voltage stabilization and filtering. The power supply must be more than 1.5 times the rated power of the electromagnetic clutch
1Electromagnetic clutch and brake areBClass insulation, normal temperature rise40℃. The working temperature at the limit thermal equilibrium is not allowed to exceed100℃Otherwise, it is easy to damage the coil and friction part.
2, power supply and control circuit, clutch power supply is generallyDC 24V(except for special orders). It is obtained by step-down and full-wave rectification of a three-phase or single-phase AC voltage. No need for voltage stabilization and filtering. The power supply must be the rated power of the electromagnetic clutch.1.5times more. The use of half-wave rectifier power supply must be equipped with a free-wheeling diode.
jaw electromagnetic clutchInstallation Precautions
1,Please use a dry electromagnetic clutch without moisture or oil. If the friction part is stained with water or oil, the friction torque will be greatly reduced and the sensitivity of the clutch will become worse. To avoid these, please stamp.
2When using in dusty places, please use the protective cover.
3.For the long axis size of the clutch, please useJIS0401 H6orJS6The specifications of. Use of key for mounting shaftHe B1301-1959One of the keys specified in.
4Considering thermal expansion and other factors, the thrust of the installation shaft should be less0.2MM.
5During installation, please mechanically adjust the suction clearance to the specified value plus or minus20%Within.
6Please keep the bracket light and do not use the bearing of the clutch to withstand excessive pressure.
7For screws used in assembly, please use spring metal sheet, adhesive, etc. to prevent loosening.
8,When using the machine side frame to hold the leads, you must use a terminal block to ensure the connection.
In order to guaranteejaw electromagnetic clutchThe uninterrupted operation must be maintained and maintained frequently:
1The active part of the electromagnetic clutch is often lubricated.
2Regularly check the length of the armature stroke. Because during the operation of the clutch, the stroke of the armature will increase due to the wear of the active surface. When the armature stroke length does not reach the normal value, it must be adjusted to restore the gap between the braking surface and the turntable to a smaller value. If the armature stroke length increases above the normal value, the suction force may be greatly reduced.
Key words:
Electromagnetic clutch, jaw electromagnetic clutch manufacturers, jaw electromagnetic clutch, electromagnetic clutch manufacturers
recommend News
The role of electromagnetic brake
2022-10-28
Regarding the difference between energized brakes and non-energized electromagnetic brakes, many users do not know the working principle of these two electromagnetic brakes and the difference between the two. Then, let's learn about the role of electromagnetic brakes!
Introduction and Application of Electromagnetic Brake
2022-10-18
Electromagnetic brakes are mainly matched with series motors and are widely used in the metallurgical industry. Construction. The chemical industry. Food. Machine tools. Phase. The elevator. Vessels. Packaging machinery and braking in the event of electrical failure.
The working principle of electromagnetic brake
2022-10-09
The electromagnetic brake is a connector that transmits torque from the active side to the passive side. Any combination of cutting or braking can be required. The electromagnetic brake has compact structure, simple operation, sensitive response and easy to realize remote control.
The company has a product research and development department composed of experts, senior engineers and other professional and technical personnel. It is engaged in research and development and has perfect research and development test equipment. At present, the products reach more than 100 series of nearly 1,000 specifications, and the force distance ranges from 0.1N. m ~ 250000N.m. The company has been rated as a high-tech enterprise by the state for more than ten consecutive years, and a number of R & D projects have been established locally and have received municipal financial support.
Service Hotline:
Sales Department: Xu Jie
Sales Phone:+86-22-26616372, +86-22-26341260, +86 13920613215
Fax: 86-022-26616580
Market Development Department: Li Shuo
Marketing Department Telephone:+86-22-26614130
Technology Department: Yue Chao
Technical Department Telephone:+86-22-26222775 ,+86 18602228435
QQ:1059237223 1611412939
Company Website:www.tjlhq.com
Enterprise E-mail:xzm@tjlhq.com
Company address: No.6, Zone B, South Jifeng Road, Hongcang City Industrial Park, Yanji Daohong, Beichen District, Tianjin