-
About UsThe headquarters of Tianjin Lingjie Transmission Technology Co., Ltd. is located in Tianjin Binhai High-tech Zone. It is an electromagnetic clutch manufacturer and a high-tech enterprise integrating R & D and manufacturing. Products are widely used in missile silos, German Leica medical equipment, rail transit equipment, smart gates, robots, CCTV stage equipment, motor brakes, port equipment, CNC machine tools, motors, cement equipment, civil air defense equipment, packaging machinery, printing machinery, Paper machinery, textile machinery, office equipment, metallurgical machinery, tobacco machinery, automated production equipment and many other mechanical transmission systems as executive components, so as to complete the clutch, reversing, speed change, braking, positioning and other functions.
营销与服务业务咨询电话： -
Products
营销与服务业务咨询电话： -
BlogOur products are exported to Europe, America, Africa, Southeast Asia and other countries. Currently, the overseas offices are located in Ohio, Hamburg, Germany and Kuala Lumpur, Malaysia. The company's customers are all over the world, among which our company is the product supporting manufacturers of German Leica, IFE rail vehicle door system, Jie Shun Technology, Shenzhen Simorro and other companies. Creating value for the society with scientific and technological innovation is my eternal pursuit of agile transmission. "Integrity, responsibility and win-win" is our consistent goal.
营销与服务业务咨询电话： -
Industry Applications
营销与服务业务咨询电话：
What are the detailed steps for installing a small electromagnetic clutch?
Release time:
2022-01-17
The detailed steps for installing a small electromagnetic clutch are as follows: Use an electromagnetic brake without water or oil. If the friction part is wet or oily, the friction torque will be greatly reduced, and the braking sensitivity will be reduced. Avoid using these.
The detailed steps for installing the small electromagnetic clutch are as follows:
1. Use water-free or oil-free electromagnetic brake. If the friction part is wet or oily, the friction torque will be greatly reduced, and the braking sensitivity will be reduced. Avoid using these.
2. When using in dusty places, all brakes should be placed in the box. Electromagnetic brakes can be used for upright and even higher models.
3. For the long axis size used to install the brake, for the key used to install the shaft, use one of the shafts specified in.
4. Considering factors such as thermal expansion, please select the thrust of the installation shaft to be less than 0.2mm.
5. When installing, please adjust the suction gap to within 20% of the specified value of the machine.
6. Keep the bracket bright and do not use the brake to withstand excessive pressure.
7. For mounting screws, use spring metal or adhesive to prevent loosening.
8. When maintaining the wires on the machine side frame, the terminal board must be used for reliable connection.
After installation, in order to ensure the uninterrupted operation of the small electromagnetic clutch, you must often perform some simple minor maintenance to make your small electromagnetic clutch use for one to two years.
1. Check the mechanical wear of the moving parts in time, and remove the dust, bristles and dirt on the surface of the electromagnet parts.
2. Regularly check the tightening degree of bolts. In particular, the bolts of the electromagnet, the bolts of the electromagnet and the housing, the bolts of the yoke, the bolts of the electromagnetic coil and the connecting bolts are tightened.
3. If the worn braking surface is replaced, the small gap between the braking surface and the turntable should be properly adjusted.
4. Check the length of the armature stroke as planned. As the run length of the armature increases during clutch operation, the stroke length of the armature will increase. When the armature stroke length does not reach the normal value, adjustments must be made to restore the small gap between the braking surface and the turntable. If the length of the armature stroke increases above the normal value, the suction force will be greatly reduced.
5. The movable part of the small electromagnetic clutch is usually added with lubricant.
Small electromagnetic clutch is not engaged:
1. No power or voltage instability, poor power contact;
Solution: Connect the power supply to ensure that the voltage is normal and the power supply wiring is normal;
2. Whether the coil is broken or burned out;
Solution: If the coil is damaged or burned out, replace the coil; if the model is too small, causing overload, replace the appropriate model;
3. Small electromagnetic clutch friction plate clearance is too large;
Solution: readjust the gap; if excessive wear for a long time, replace the friction plate;
4. Whether there is foreign matter blockage between the friction plates of the small electromagnetic clutch;
Solution: Clean the foreign matter between the friction plates.
Basic usage:
1. Connection and disconnection action: If a clutch is installed between the driving part and the starting part, there is no need to stop the driving part, the starting part will connect and disconnect according to the necessary response.
2. Speed change: there is a situation of mutual speed change during operation. If the clutch is used at this time, the speed can be changed without turning off the drive.
3. Forward and reverse rotation: When the forward and reverse rotation of the load point is switched and used together with the clutch, the external drive can only rotate forward.
4. High frequency operation: fast cycle intermittent operation, repeated use of on and off on the motor, limit frequency and off. Therefore, the clutch is used to make it react quickly and the braking accuracy is high.
Key words:
Small electromagnetic clutch
recommend News
The role of electromagnetic brake
2022-10-28
Regarding the difference between energized brakes and non-energized electromagnetic brakes, many users do not know the working principle of these two electromagnetic brakes and the difference between the two. Then, let's learn about the role of electromagnetic brakes!
Introduction and Application of Electromagnetic Brake
2022-10-18
Electromagnetic brakes are mainly matched with series motors and are widely used in the metallurgical industry. Construction. The chemical industry. Food. Machine tools. Phase. The elevator. Vessels. Packaging machinery and braking in the event of electrical failure.
The working principle of electromagnetic brake
2022-10-09
The electromagnetic brake is a connector that transmits torque from the active side to the passive side. Any combination of cutting or braking can be required. The electromagnetic brake has compact structure, simple operation, sensitive response and easy to realize remote control.
The company has a product research and development department composed of experts, senior engineers and other professional and technical personnel. It is engaged in research and development and has perfect research and development test equipment. At present, the products reach more than 100 series of nearly 1,000 specifications, and the force distance ranges from 0.1N. m ~ 250000N.m. The company has been rated as a high-tech enterprise by the state for more than ten consecutive years, and a number of R & D projects have been established locally and have received municipal financial support.
Service Hotline:
Sales Department: Xu Jie
Sales Phone:+86-22-26616372, +86-22-26341260, +86 13920613215
Fax: 86-022-26616580
Market Development Department: Li Shuo
Marketing Department Telephone:+86-22-26614130
Technology Department: Yue Chao
Technical Department Telephone:+86-22-26222775 ,+86 18602228435
QQ:1059237223 1611412939
Company Website:www.tjlhq.com
Enterprise E-mail:xzm@tjlhq.com
Company address: No.6, Zone B, South Jifeng Road, Hongcang City Industrial Park, Yanji Daohong, Beichen District, Tianjin