Papua New Guinea DLM5 Series Wet Multi-disc Electromagnetic Clutch

Since the engagement and disengagement of the electromagnetic clutch are carried out at high speed, there will be many traces of clutch on the iron suction plate and the surface of the rotor. These marks are not hazardous to work and are permitted. 2) Apply a suitable voltage to the electromagnetic coil. For a 12V voltage electromagnetic coil, if it is added to a 6V voltage system, it cannot generate enough magnetic field, which will cause the suction iron to slip, shorten the life of the clutch, and reduce the cooling capacity.

Category:

Papua New GuineaMulti-disc electromagnetic clutch

Papua New GuineaNetting machine equipment

Phone:400-888-8888

Inquire

Product Description

1) Since the engagement and disengagement of the electromagnetic clutch are carried out at high speed, there will be many traces of clutch on the iron suction plate and the surface of the rotor. These marks are not hazardous to work and are permitted. 2) Apply a suitable voltage to the electromagnetic coil. For a 12V voltage electromagnetic coil, if it is added to a 6V voltage system, it cannot generate enough magnetic field, which will cause the suction iron to slip, shorten the life of the clutch, and reduce the cooling capacity. Conversely, if a 6V coil is added to a 12V voltage system, the coil life will be shortened. 3) The gap between the coil and the rotor is very important. The coil and the rotor should be as close as possible to obtain a stronger magnetic field, but the gap should not be too small to prevent the rotor from dragging the coil (for the fixed-ring clutch). 4) The gap between the rotor and the suction iron is also very important. If this gap is too small, the rotor will drag the suction iron when the clutch is disengaged. However, if the gap is too large, there is too little contact between them when the clutch is operated. Both of these conditions can cause poor clutch performance. The reasonable gap between them should be that when the clutch has no current, the two do not drag; when the clutch has current, it can ensure that no slippage occurs.

1. Connection and cut-off action: installation between the driving part and the starting part does not need to stop the driving part, and the starting part will do connection and cut-off action according to the necessary reaction. 2. Speed change: there is a situation of mutual speed change during the operation. If the clutch is used at this time, the speed can be changed without closing the drive. 3. Positive and reverse rotation: When the load point is switched to positive and reverse rotation, it is only necessary to rotate in the forward direction when used with the clutch. 4. High-frequency operation: in the rapid cycle of intermittent operation, repeated use of the motor ON, OFF provided by the frequency is limited, so the use of clutch, so that rapid response, high-precision braking. 5. Inching: When the machine starts to operate and the position is engaged, it only needs to operate the clutch instantaneously.

Main performance parameters

Main Technical Data

Specifications Model	Rated dynamic torque Rated Torque N.M	Rated static moment Rated Static Torque N.M	no-load moment Drag Torque (≦) N.m	On time Engagement Time (≦)S	Disconnection time Disengagement (≦)S	Rated voltage Rated Voltage D.C.V	Coil power consumption (20 ℃) CoilPower (20℃)W	Maximum allowable speed Max Allowed Speed r/min	Weight Weight Kg	Oil supply flow Oil Flow Rates L/min
1.2/1.2C	12	20	0.39	0.28	0.09	24	10	3500	1.3	0.20
2.5	25	40	0.40	0.30	0.09	24	17	3500	1.73	0.25
5/5C	50	80	0.9	0.32	0.10	24	17	3000	2.9	0.40
10/10C	100	160	1.80	0.35	0.14	24	19	3000	4.3	0.65
16	160	250	2.40	0.37	0.14	24	26	2500	5.53	0.65
25/25C	250	400	3.50	0.40	0.18	24	39	2200	8	1.00
40	400	630	5.60	0.42	0.20	24	45	2000	12.2	1.00
63	630	1000	9.00	0.45	0.25	24	66	1800	16.2	1.2
100	1000	1600	15.0	0.65	0.35	24	81	1600	23.2	1.2
160	1600	2500	24.0	0.90	0.45	24	87	1600	31.7	1.5
250	2500	4000	37.50	1.20	0.60	24	100	1200	47.1	2.0
400	4000	63000	60.00	1.50	0.80	24	134	1000	100.9	3.0

Installation Schematic
Installation Diagram

Outline and installation dimensions
Shape and Installation Dimensions

Specifications Model	Radial Dimensions										Axial dimension Radial Dimensions					Brush model
	D1	D2	D3	D	d	b	Φ	e	h	H1	L	L1	L2	L3	L4	DS-002
1.2	86	50	86	200 0.023	170 0.12	6 0.025 0.065	20	6	22.80 0.1	——	43.5	38	5.5	5	7
2.5	96	56	96	250 0.023	210 0.14	5 0.025 0.065	25	8	28.30 0.2	——	48.5	43	5.5	7	7
5	113	65	113	300 0.023	260 0.14	6 0.025 0.065	30	8	33.30 0.2	——	55.5	50	5.5	7	8	DS-001
10	133	75	133	400 0.027	350 0.17	10 0.035 0.085	40	12	43.30 0.2	——	61	54.5	6.5	8	10
16	145	85	145	450 0.027	400 0.17	12 0.045 0.105	45	14	48.80 0.2	——	63.5	57	6.5	8	10
25	166	95	166	500 0.027	450 0.17	12 0.045 0.105	50	14	53.80 0.2	——	72	64.5	7.5	10	10
40	192	120	192	600 0.030	540 0.20	14 0.045 0.105	60	18	64.40 0.2	——	82.5	74.5	8	10	10
63	212	125	212	700 0.030	620 0.20	16 0.045 0.105	70	20	74.90 0.2	——	91.5	82	9.5	12	10
100	235	150	235	——	——	——	70	20	74.90 0.2	——	105	96	10	15	10
160	270	180	270	——	——	——	100	28	106.40 0.2	——	118	104	14	15	10
250	310	220	310	——	——	——	110	28	116.40 0.2	122.80 0.4	130	116	14	10	12
400	415	235	415	——	——	——	120	32	127.40 0.2	134.80 0.4	150	132	18	10	12
1.2C	94	50	86	300 0.023	260 0.14	8 0.035 0.085	——	——	——	——	56	50.5	5.5	19	10
5C	116	65	113	400 0.027	350 0.17	10 0.035 0.023	——	——	——	——	59.5	54	5.5	19	10
10C	142	85	133	500 0.027	450 0.17	12 0.045 0.105	——	——	——	——	64.5	58	6.5	19	10
25C	176	105	166	650 0.030	580 0.20	16 0.045 0.105	——	——	——	——	81	73.5	7.5	21	10

Papua New GuineaDLM0 series wet multi-disc electromagnetic clutch

Papua New GuineaDLM10 Series (EKE Series) Multi-disc Electromagnetic Clutch

: next page

The company has a product research and development department composed of experts, senior engineers and other professional and technical personnel. It is engaged in research and development and has perfect research and development test equipment. At present, the products reach more than 100 series of nearly 1,000 specifications, and the force distance ranges from 0.1N. m ~ 250000N.m. The company has been rated as a high-tech enterprise by the state for more than ten consecutive years, and a number of R & D projects have been established locally and have received municipal financial support.

Gate control system clutch

Electromagnetic brake for rail transit system

Robot special clutch

Special Clutch for Medical Equipment

Permanent magnet clutch

Jaw electromagnetic clutch

Single-plate electromagnetic clutch

Electromagnetic power-loss clutch

Electromagnetic clutch brake

Slip clutch HC3-25B (rubber plate machine)

Special for DLM2 series rolling mill

ZAA series metallurgy, steel industry special